King Electric King Self Regulating Heat Trace Cable | 120 Volt | 5 Watts/Foot | Bulk Coil

King Electrical Self Regulating Pipe Trace Heating Cable is designed for a variety of industrial, commercial and residential pipe heat tracing and rain gutter applications. The self-regulating feature allows the cable to be overlapped without overheating or burning out the cable.

This heat trace cable can be cut to any length and terminated on site with an (optional) King SRK12 End Seal Kit. 

The heat trace can be powered with (optional) King SRK08 Plug-In Connection Kit w/ GFCI Device. Alternatively, it can also be controlled with the (optional) PYRO FPC “Plug and Play” Freeze Protection Controller.

The maximum length of a heat trace cable run is noted in the table below and cannot be exceeded. If the application requires a longer cable run, then multiple cables and additional power circuits must be used. 240 volt heat trace cable allows for double the maximum length of 120 volt heat trace cable in a single run.

King Electrical Self Regulating Pipe Trace Heating Cable carries a 2 year warranty.

Watts Per Foot	120 Volt Maximum Run	240 Volt Maximum Run
3 Watts/Ft	325 Feet	650 Feet
5 Watts/Ft	270 Feet	540 Feet
8 Watts/Ft	210 Feet	420 Feet
10 Watts/Ft	180 Feet	360 Feet